PCEngineFans.com - The PC Engine and TurboGrafx-16 Community Forum

NEC PC-Engine/SuperGrafx => PC Engine/SuperGrafx Discussion => Topic started by: breakz on September 25, 2005, 02:04:05 AM

Title: Hi TO ALL!: I'm NEW and I HAVE A TECHNICAL REQUEST for DUO-R
Post by: breakz on September 25, 2005, 02:04:05 AM: HI to ALL!

I'm NEW and I HAVE a TECHNICAL QUESTION about PC ENGINE DUO-R:

I have thid console with original power suplly and it funtions very well but to use it ( i live in Italy) i must use a step-down convertor (220 to 110 Volts)...The Question is:

- Do you know any AC POWER SUPPLY THAT directly gives to DUO-R 9v and 1000 ma from 220 Volts.......or similar?

- Do you know any ac power supllies of other consoles that are good for DUO-R ( WITH THE SAME TECHNICAL REQUESTS and WITH THE SAME PLUG o fthe DUO-R)?

now bye and thanks for all!......and REPLY ME SOON! :p
Title: Re: Hi TO ALL!: I'm NEW and I HAVE A TECHNICAL REQUEST for D
Post by: rolins on September 25, 2005, 07:15:39 AM: Welcome to the forum. Hope you enjoy it here. Everyone here is alright and we always try to help out.

Quote from: "breakz"
- Do you know any AC POWER SUPPLY THAT directly gives to DUO-R 9v and 1000 ma from 220 Volts.......or similar?

There is, but I cannot remember. I did see some one selling such a AC adaptor on ebay a few months ago, but I don't know how reliable they are. They might be just ordinary multi-adaptors.

Quote from: "breakz"
- Do you know any ac power supllies of other consoles that are good for DUO-R ( WITH THE SAME TECHNICAL REQUESTS and WITH THE SAME PLUG o fthe DUO-R)?

I suggest sticking to your original AC adaptor and step down converter. It's much more reliable and safer.
Title: Hi TO ALL!: I'm NEW and I HAVE A TECHNICAL REQUEST for DUO-R
Post by: Keranu on September 25, 2005, 08:33:28 AM: There seems to be tons of power supply questions since the summer time.
Title: Hi TO ALL!: I'm NEW and I HAVE A TECHNICAL REQUEST for DUO-R
Post by: Nutribrain on September 25, 2005, 03:26:35 PM: Just try and visit your local electronic dealer like Conrad Electronics and ask him for an adaptor with the right specifications. I have all my consoles hooked up to normal adaptors except the PC-FX because it hat the adaptor built right into the console. My PCE and SGX for example are hooked up to "normal" standard adaptor with multiple connectors.
Title: Hi TO ALL!: I'm NEW and I HAVE A TECHNICAL REQUEST for DUO-R
Post by: Kaminari on September 25, 2005, 04:06:49 PM: Agreed. Go to Conrad (http://conrad.com/) and search for "Voltcraft SNG". That's the adaptor you want.
Title: Hi TO ALL!: I'm NEW and I HAVE A TECHNICAL REQUEST for DUO-R
Post by: Keranu on September 25, 2005, 04:49:10 PM: I'll remember to do that if I ever get a similar problem, like how I almost did when I thought my PCE CD wouldn't have one.