PCEngineFans.com - The PC Engine and TurboGrafx-16 Community Forum
NEC TG-16/TE/TurboDuo => TG/PCE Repair/Mod Discussion => Topic started by: bust3dstr8 on January 14, 2012, 03:36:12 AM
-
Lamekat and I are starting up on two Jamma adapter boxes for any PCE modded with a Dsub out.
Inputs will be a D-sub9 and a mindin that will be fed through the pad hack, RGB amp, and sound power amp.
All these will then be bundled to a standard Jamma loom.
D-Sub9 attached to RGB, Sync, Gnd and Right Audio
(http://img193.imageshack.us/img193/6021/dsc02237hs.html)
Straight RGB and Sync with 47ohms on a Wells K7000 chassis.
Sync works good, RGB is overdriven and will be fed through an amp and three .5K trimmers later.
(http://img857.imageshack.us/img857/5732/dsc02205n.jpg)
74HC157 Controller IC
2) I or But2 10) Down
3) Up 11) Select or But3
5) II or But1 13) Left
6) Right 14) Start
8 ) Gnd
(http://mazharlaliwala.files.wordpress.com/2011/07/74157_dil_pin.gif)
Ribbon cable soldered to the back of the 74HC157. On the right side J701 and J702 bridged to
ground the buttons when the turbo switches are removed.
(http://img252.imageshack.us/img252/140/dsc02242c.html)
-
GODDAMN I AM ENVIOUS!
What a sweet, sweet setup that will be. If you have more pics, please share :)
-
we believe in sharing in this community, i think you should make one for all of us ;). Nice work btw, like esteban said
: GODDAMN I AM ENVIOUS!
-
More pics!!! Please :)
-
Wow I would love to do this in my cab! Lords of Thunder would be so awesome on a real arcade monitor
-
Some mixed results with the CD.
Dynamo Cab - http://imageshack.us/clip/my-videos/35/a9l.mp4/
Astro City - http://imageshack.us/clip/my-videos/84/ok3x.mp4/
(http://img28.imageshack.us/img28/1343/dsc02244xh.html)