PCEngineFans.com - The PC Engine and TurboGrafx-16 Community Forum
NEC TG-16/TE/TurboDuo => TG/PCE Repair/Mod Discussion => Topic started by: FiftyQuid on July 16, 2012, 07:50:39 AM
-
I decided to organise the repair guides. As a new comer, walking into the TG/PCE Repair/Mod Discussion thread was quite overwhelming. There is a ton of great information within this section of the forum and some excellent step by step repairs/mods. I felt that a table of contents would help organise the information so nothing is lost and maybe help alleviate some of the stickies which are starting to stack up.
RULES: Discussion Forum by Pcenginefx (Updated: 3/27/08)
TurboDuo/PC Engine Duo
[ul][li]Total Capacitor Replacement Chart by Red Ghost
[/li][li]Laser Swap & Adjustment Guide by blueraven
[/li][li]Sound Fix by chop5
[/li][/ul]
TurboGrafx-16/PC Engine CD
[ul][li]Total Capacitor Replacement Chart + Useful Info by Red Ghost
[/li][li]Laser Swap Guide (Pictoral) by Blackandblue
[/li][/ul]
TurboExpress
[ul][li]Total Capacitor Replacement Chart by Red Ghost
[/li][li]Sound Fix (http://www.pcenginefx.com/forums/index.php?topic=702.0) by D-Lite
[/li][li]Video Fix by nat
[/li][li]AC Adapter Fix by akaviolence
[/li][li]Battery Tray/Connectors by blue raven
[/li][/ul]
PC Engine GT
[ul][li]Video Fix by nat
[/li][/ul]
-
If everyone like this idea I'll keep it going and add more to it. You can suggest additions as well. I just didn't want to waste any more effort if no one liked the concept.
-
You got my vote!
Would be nice to get rid of the stickies and see more threads on the first page.
Great work!
-
Thanks a bunch!
If you were to add a section on the PC Engine Duo R/RX, that would be great.
-
Would be nice to get rid of the stickies and see more threads on the first page.
Yeah, this was my main goal.
If you were to add a section on the PC Engine Duo R/RX, that would be great.
Good idea. I'm going to wait for a bit more feedback before proceeding.
-
Don't forget the TE LCD and composite vid out that thesteve discovered. However I don't think there is a detail instruction. If it cool with thesteve, I can start one on the next mod I'll do but I must warn that I'm not to good with the written English language.
-
i think i left enough detailed instructions.
note the GT and express should be lumped, as they are the same board (TE has 1 resistor added)
-
Good idea. I agree that the existing method is a bit cumbersome.
Is the intent to simply combine the various threads into common product types, or create a "shortcut to repairs" for the various products. If the latter, do you intend to make a repair manual for each of the products? I ask because doing that means scouring the various threads for whatever tech/repair info you can find (including any sporadic info on voltages, schematics, pot settings, et) , and compiling each piece of that data into the appropriate manual. I suspect this is rather a large task....but good luck to you either way.
If you DO create the repair manuals, I am sure many here could help by pointing you to the various threads/posts that contain many pieces of information....I'm sure you won't have to do all the searching yourself.
Charlie
-
If there is interest in building some comprehensive repair guides on a per hardware basis, I wouldnt mind helping out.
-
Okay guys, I'll take your suggestions and try to clean things up a little more. I should have some time tomorrow.