PCEngineFans.com - The PC Engine and TurboGrafx-16 Community Forum

NEC TG-16/TE/TurboDuo => TG/PCE Repair/Mod Discussion => Topic started by: wilykat on August 05, 2012, 05:07:26 PM

Title: Wiring diagram for PCE <-> TG-16 controller adapter?
Post by: wilykat on August 05, 2012, 05:07:26 PM

TG-16 didn't get many variety of controllers and AFAIK no 3 or 6 buttons controller were made for TG-16 whoch uses the larger DIN connector.  PCE uses mini DIN and I've seen part about cable swap but I'd like to build an adapter so I don't need to swap a few cables around.

However I didn't find any wiring diagram for adapter so can anyone tell me which pin goes to which pin?  I'm pretty sure it's not as simple as pin 1 to pin 1, pin 2 to pin 2, etc.

Title: Re: Wiring diagram for PCE <-> TG-16 controller adapter?
Post by: Necromancer on August 06, 2012, 05:25:35 AM

GameSX (http://www.gamesx.com/controldata/turbocont.htm) shows pinouts for both.  :wink: