PCEngineFans.com - The PC Engine and TurboGrafx-16 Community Forum
NEC TG-16/TE/TurboDuo => TG/PCE Repair/Mod Discussion => Topic started by: wilykat on August 20, 2012, 04:05:35 PM
-
Was dusting off my spare CD dock when I noticed something rattling. I took it apart and something big came out. At first I thought it was a huge bug... then I realized bugs don't have 25v47uF marking.
Anyone point me on a how-to take apart the CD base for cap repair? I got all the screws out but I can't quite remove the upper parts (where CD drive plugs in) from lower part (where TG-16 connector is)
EDIT: the base was working when I checked a few years ago, it doesn't work now.
-
Wow, I think that's the worst cap I've ever seen.
-
It came from a spot where the cable connecting the rear ports (A/V and power) goes to. I'd guess the previous owner used the wrong power adapter and blew it up, but remained attached until at one time before I tested it last night when it came loose to rattle around. It also likely caused the remaining metal posts on the board to short out. It was working again when I pulled the posts apart.
There seems to be no guide on disassembly so I've been taking pictures along the way. That way I can do a full cap work and post a take-apart guide with caps list. Also to find out the correct orientation of that blown cap.