PCEngineFans.com - The PC Engine and TurboGrafx-16 Community Forum

NEC TG-16/TE/TurboDuo => TG/PCE Repair/Mod Discussion => Topic started by: mrchuck999 on February 12, 2013, 04:24:42 AM

Title: Turbo Grafx PC-Engine circuit baord cable connector
Post by: mrchuck999 on February 12, 2013, 04:24:42 AM

Hi Does anyone know the name of the type of connector used inside TG & PCE  controllers ? This is a 9 pin flat PCB connector used inside of pc-engine and TG16 controllers..   If you know of a website that sells them please let me know. But even the connector's official name would help.    Thanks
(http://i371.photobucket.com/albums/oo158/mrchuck999/pcepadplug001_zpsc00b62e5.jpg)

Title: Re: Turbo Grafx PC-Engine circuit baord cable connector
Post by: Fidde_se on February 13, 2013, 03:57:49 AM

This is a so called Wire-to-board Receptacle, it's 9 Pin with 2.5mm Pitch, Unfortunatly Molex doesn't make 2.5mm but STC does.
These connectors probably comes without crimp connectors and has to be bought beside the connector (SCT2511T)
The Connector itself is an SCT2511H-09P, You should have crimp tool for it but can be done without, you could solder them instead.
If you'r going to put an PCE controller cable on it those can be found here

http://gamedoctorhk.com/index.php?main_page=product_info&products_id=225

For the PCB connector it's an SCT2511WR-09P