PCEngineFans.com - The PC Engine and TurboGrafx-16 Community Forum
Non-NEC Console Related Discussion => Console Sales & Trades => Topic started by: Mishran on June 28, 2013, 03:57:32 AM
-
Ok... this is, as the topic states, a gauge of interest in my MVS cab. I'm also having to give it up, which is the hardest of it all to part with. I wanted one for years, finally got one and now I gotta give it up. Life is cruel. :(
Anyway, enough of my self pity...
(http://imageshack.us/a/img189/3640/e2eh.jpg)
This is it. It isn't a official SNK "Big Red", but it appears to have been converted using an official kit. Inside is an MV-1F board. It's got a 19" monitor and stereo sound. It's in good shape, but could use a little TLC, which I never got around to doing. Here are some of the outside blemishes the cab has.
(http://imageshack.us/a/img689/2293/r1bs.jpg)
The little strip above the marquee appears to have broke at some point. I took a piece of scotch tape to hold it together to keep it from coming off the rest of the way.
(http://imageshack.us/a/img845/8518/e2ll.jpg)
Above the monitor on the bezel is a spot that looks like something was taped to it. It was removed, tore the bezel and some idiot (not me) tried to cover it up with a red marker. #-o
(http://imageshack.us/a/img24/5362/4gqn.jpg)
There is a white mark on the control panel overlay and the button markers look like they were twisted a little somehow.
(http://imageshack.us/a/img694/6148/2dd2.jpg)
The overlay had started to peal away at some point and was fixed with packing tape.
(http://imageshack.us/a/img7/9855/il3x.jpg)
The black mask is starting to peal away here.
(http://imageshack.us/a/img854/533/osjt.jpg)
A little chipping here.
(http://imageshack.us/a/img809/7216/lz09.jpg)
More overlay peeling on the other side.
(http://imageshack.us/a/img819/589/7hfp.jpg)
A decent size chip on the left side of the cab close to the back on the bottom.
Some pics of the inside of the cab.
(http://imageshack.us/a/img822/8886/mqmb.jpg)
Back of the monitor. The cardboard cover was hanging off, so I took a zip tie through the two attached to hold the board in place. :-"
(http://imageshack.us/a/img854/1328/s2c4.jpg)
The part of the cab that matters most. The MVS is connected to the stereo speakers through the stereo connector.
(http://imageshack.us/a/img12/5368/bi60.jpg)
Power supply board. The +5v took a shit so I had to swap out the switching power supply with a cheap one.
(http://imageshack.us/a/img542/9390/a1x6.jpg)
Couple of crack running from the coin door to the outer edges. Doesn't appear to affect the integrity of the panel though.
(http://imageshack.us/a/img836/1513/wmz6.jpg)
A little tag attached to the coin door. Originally a Samurai Shodown cab? :)
I live about an hour from Harrisburg, PA and this isn't exactly something I can box up and drop off at the post office. This would basically be for anyone close enough to drive to get it. I haven't decided on a price or anything yet, as I'm waiting to see where my other sale will get me first.
If get no hits here, I'll post it on Craigslist. Thanks for looking!