PCEngineFans.com - The PC Engine and TurboGrafx-16 Community Forum
NEC TG-16/TE/TurboDuo => TG/PCE Repair/Mod Discussion => Topic started by: albatross on October 04, 2013, 12:44:30 PM
-
i recently aquired a white pc engine console and it does not work properly - when turned the screen just seems to just roll or flip continuously - it does not stay steady - has anyone ever had this problem? is it toast? thanks
-
More info please:
how is it connected? what kind of TV is it connected to?
what AC adapter are you using?
-
its connected with the briefcase unit which i know works fine because i have a core grafx that works in it and i have my duo connected to the tv which is just an old rca flat tube
-
Thanks, hmmm this one os out of league however. I will put some good karma here for some guys to come along who would be able to help you with this one
#Thesteve, #Bluebmw,#Turboken, #Apploboy, #Arkhan, #Necromancer, #sparky, #everyoneelseknowledgable that I can't remember.
-
thanks i appreciate that
-
US TV or Jap TV? White PCE (iirc) is japaneese, so need channel 63 or 64 and some fine tuning on the TV.
FWIW, sounds like a vertical hold adjustment.
-
its connected with composite video through the interface unit (briefcase) i have another on that works fine on the same briefcase unit so i know its not the tv - do you think it may just need to be opened up and a good cleaning?
-
Seen it once, it was a bad huc6260 causing it
Sent from my ADR6300 using Tapatalk 2
-
whats an huc6260?
-
Unfortunately that is a chip on the motherboard.
-
im guessing by your saying "unfortunately" that is no repair for this?
-
the Steve could probably repair it for you. changing out chips of that nature is not something I feel very comfortable doing. also, depending on the cost it may not even be worth it.
-
ya doesnt sound like it would be worth it at all - guess it will just go on a shelf and become a show piece - what a waste of a great system! have to hunt down another i suppose
thanks for the help!
-
Yeah, without the right equipment, changing out thoses IC's can be a dunting task.
-
ya doesnt sound like it would be worth it at all - guess it will just go on a shelf and become a show piece - what a waste of a great system! have to hunt down another i suppose
thanks for the help!
the shell is still good. :)
-
ya doesnt sound like it would be worth it at all - guess it will just go on a shelf and become a show piece - what a waste of a great system! have to hunt down another i suppose
thanks for the help!
do you only need another one because you want to fit it with the cd-rom briefcase color (white to white)?
then you could try to exchange the casing from the core I / II you have with the white non-working one :)
-
ya the shell is actually in great shape - bright white - maybe i will find an old dirty yellow one that works for cheap and swap it out
-
Just to rule something out did you try it with an rf switch from the console itself (no ifu?) An nes gray-box rf switch should work.