PCEngineFans.com - The PC Engine and TurboGrafx-16 Community Forum

NEC TG-16/TE/TurboDuo => TG/PCE Repair/Mod Discussion => Topic started by: Arkhan on October 11, 2013, 05:47:20 AM

Title: PC Engine RGB mod + XRGB3 information
Post by: Arkhan on October 11, 2013, 05:47:20 AM

SO, if you've gotten an RGB modded PCE of some variety and you notice that there is this f*cking annoying bend at the top of the screen, here's what you do.


http://junkerhq.net/xrgb/index.php/XRGB-3 

Go to Special Screen Settings.

Set the NTSC AFC to manual
then, change the value back and forth until the bend goes away.

I Used 4, and it produces a perfect image now.



Why the PC Engine is the ONLY RGB console I own that requires this is beyond me, but now you know!

Title: Re: PC Engine RGB mod + XRGB3 information
Post by: turboswimbz on October 11, 2013, 07:51:09 AM

Thanks for the info as I will be grabbing an Xrgb soon.  8)