PCEngineFans.com - The PC Engine and TurboGrafx-16 Community Forum

NEC TG-16/TE/TurboDuo => TG/PCE Repair/Mod Discussion => Topic started by: Valius on March 07, 2014, 07:57:51 PM

Title: Tennokoe 2 battery wiring
Post by: Valius on March 07, 2014, 07:57:51 PM

Hi everyone,

While modding my Tennokoe 2 to use as an RGB box for my TG16, I pulled the wires connected to the battery terminals.  I wanted to re-solder the wires back to the battery terminals so I can use the Tennokoe 2 for its normal purposes, but I have no idea which wire goes where.  Does anyone have a diagram or a picture of where the wires are supposed to connect to?

Title: Re: Tennokoe 2 battery wiring
Post by: Fidde_se on April 22, 2014, 08:25:19 AM

This way!