PCEngineFans.com - The PC Engine and TurboGrafx-16 Community Forum

NEC TG-16/TE/TurboDuo => TG/PCE Repair/Mod Discussion => Topic started by: schweaty on May 23, 2014, 02:39:50 AM

Title: Need ideas on how to mount component jacks to a Super CDROM2
Post by: schweaty on May 23, 2014, 02:39:50 AM
This will probably be a little controversial since many of you think it would be defacing a Super CDROM2 by installing component jacks.  I am still kicking around the idea of replacing the stock DIN on it.  The only thing keeping me from that is the lack of component to DIN cables (at least I cant find one that has component and sound in the same cable).  And I've never built a cable like that, so I'm afraid it will come out looking like hacked ass.

I can't seem to find any pics of a Super CDROM with component jacks.  What do you think?  Straight out the back (what i'm leaning towards).  The power side or av side?  Someplace I havent thought of yet?

If you have done this mod to your console let me know how it worked out.  Even if you dont have a Super CDROM, I'm open to inputs.

Title: Re: Need ideas on how to mount component jacks to a Super CDROM2
Post by: turbokon on May 23, 2014, 03:00:59 AM
I prefer to keep the stock look on my systems as much as possible.  I have done component mods on the duo's using the din 8 and make my own din 8 to component rca's using these:

http://www.ebay.com/itm/400137803492

http://www.ebay.com/itm/230951019339

http://www.ebay.com/itm/290571600803
Title: Re: Need ideas on how to mount component jacks to a Super CDROM2
Post by: schweaty on May 23, 2014, 05:01:00 AM
thanks, turbo.  i may reconsider building a cable.  first time for everything.  there's not much cost involved, so i could screw up a few times. 
Title: Re: Need ideas on how to mount component jacks to a Super CDROM2
Post by: Keith Courage on May 23, 2014, 11:19:54 AM
As for another option you could always mount a DIN in the PC engine itself to avoid doing any modding to the CD drive.