PCEngineFans.com - The PC Engine and TurboGrafx-16 Community Forum
NEC TG-16/TE/TurboDuo => TG/PCE Repair/Mod Discussion => Topic started by: retrofixes on September 08, 2014, 01:29:04 AM
-
I own a PC Engine plus cd-rom setup & a turbo 16 cd setup.
Here's is my issue:
The PC-engine and white cd-rom works great no issues.
The black American CD-rom unit only works when installed on the PC-engine INF unit.
When i plug the black cd-rom into the TB16 it spins and never loads the game.
At first I assumed the TB16 docking station was faulty, yet when I install the White cd-rom it works without hesitation.
What would cause the black cd-rom unit to only work on the pc-engine IFU?
-
Inadequate power supply on the TG-16 dock? Maybe the black drive is sucking slightly more juice than the white one.
I'm not a techy guy, so that's pretty much a WAG. Steve/Turbokon/Keith/etc. will come along and give ya a more likely solution.
-
Inadequate power supply on the TG-16 dock? Maybe the black drive is sucking slightly more juice than the white one.
I'm not a techy guy, so that's pretty much a WAG. Steve/Turbokon/Keith/etc. will come along and give ya a more likely solution.
Yep Necromancer is right. The TG dock draws more voltage then the ifu.
-
I bet that's it. I only have the original PC engine power supply for testing.