PCEngineFans.com - The PC Engine and TurboGrafx-16 Community Forum
NEC TG-16/TE/TurboDuo => TG/PCE Repair/Mod Discussion => Topic started by: Voultar on November 18, 2014, 12:59:04 PM
-
I'm repairing a Duo-R unit, and one of the previous owners has lifted the pads that go to the kathode and anode of the access LED (on both sides of the board)
I was looking for a diagram of the drive assembly but couldn't find any information. I tried following the traces but didn't get very far. Does anyone know where I can pull the access signal from?
EDIT:
Disregard, I tracked it down. This may help someone in the future who's doing board repairs:
Excuse the crude outlining, but it's self explanatory.
(http://i57.tinypic.com/f221ll.jpg)