PCEngineFans.com - The PC Engine and TurboGrafx-16 Community Forum
NEC TG-16/TE/TurboDuo => TG/PCE Repair/Mod Discussion => Topic started by: tigre on December 22, 2014, 12:33:15 AM
-
So long story short, I took my Duo-R apart about a month and a half ago to retrobrite it and replace the A/V port then got busy with school. Now I want to play Exile and I cannot remember how this lid is supposed to go back on the unit. I have a metal bracket, two springs and two screws. The Duo-R doesn't really "pop" open all the way like some other systems, I remember this much. But how this is supposed to go back on the system- I forget. I see where the metal bracket should go, but I forget where these springs are supposed to be. Anyone help an idiot out here?
http://i.imgur.com/E2jR8zQ.jpg (http://i.imgur.com/removed.png)
-
As much as I would love to be able to help you, im stuck at work with no way to post imgs. Youtube is probally gonna be the quickest way to get you back up an running instead of waiting for someone to post edited and highlighted images
-
I did not see any videos of anyone taking apart the lid of the Duo-R on youtube :( If anyone has a link i'd love to see it!
-
Post some pics of the specific parts disassembled, and I will post some of it assembled.
-
I have a link to a picture with the parts in question in the op, unless there's something missing from that one
-
there are missing parts in that pic
the lid needs its threaded pin to attach to the duo
then everything else goes under the cover and the lid switch
-
I have that screw.
I see exactly where the plate and the two screws pictured go, but where the two springs go is the question
-
they go under the top cover
in the lid catch assy