PCEngineFans.com - The PC Engine and TurboGrafx-16 Community Forum
NEC PC-Engine/SuperGrafx => PC Engine/SuperGrafx Discussion => Topic started by: elmer on February 03, 2015, 11:58:05 AM
-
SuperGrafx owners already know that the SuperGrafx won't physically fit in the standard-at-the-time Japanese IFU-30 CD briefcase, and required the ugly RAU-30 interface cable in order to use the PC Engine CD.
Maybe I'm crazy, but it just occurred to me that the SuperGrafx came out at approximately the same time that the TurboGrafx came out in the US, and that the TurboGrafx's rear-end looks a lot like the SuperGrafx's rear-end ... and that's got me wondering.
Does a SuperGrafx fit into the US TurboGrafx's CD unit? Has anyone ever tried this?
-
the aesthetic appeal of a super grafx with the brief case old cd rom is not exactly appealing
http://www2s.biglobe.ne.jp/~tetuya/FXHP/pcengine/hard/romada2.jpg
However, super grafx directly into a super cd rom is not bad, though it takes a lot of room ( depth wise) , best ( imo) is super grafx with rau-30 into a super cd rom so you can place it lengthwise, seems unnecessary, but it seems a stunner
-
However, super grafx directly into a super cd rom is not bad, though it takes a lot of room ( depth wise) , best ( imo) is super grafx with rau-30 into a super cd rom so you can place it lengthwise, seems unnecessary, but it seems a stunner
Hmmm ... I hadn't thought of using both the RAU-30 and the SuperCDROM ... I'll have to try it to see if I agree with you.
I imagine that the SuperGrafx/TurboGrafxCD combo could look quite good ... if only it fitted.
-
Interesting combo idea; you got me curious...
Just tried test fitting and it won't work without serious modifications. Height of the SGX expansion port is about a 1/2 inch higher than the Turbografx port making the insertion angle off. Maybe taking off the bottom of the SGX case might work.
If you somehow get the SGX to insert straight, you still would need to modify the port opening to fit.
Modding the RAU-30 to fit the Turbografx CD might be easier. That would be one funky looking system though.
(http://i.imgur.com/j7YaGIl.jpg)
(http://i.imgur.com/bopO3lj.jpg)
(http://i.imgur.com/xsfWjAV.jpg)
-
Thank you so much for trying that and posting such great pictures! :)
I've got to say ... that if it had actually fit, then IMHO, it would have been quite a nice combo, and an interesting alternative to the SuperCDROM.
-
I gotta say if you took the front of the CD unit off, then it look like it should fit, you'd just have to make rubber footies for the SGX
-
Hey, speak of the devil, a shop near me just put an RAU-30 up for sale for about 3000 yen. Should I get it?
I do have a Supergrafx, although I also have a Duo and I really don’t need to “simplify” my setup at all.
Maybe if someone here wants it, we could set up a deal.
-
Maybe if someone here wants it, we could set up a deal.
Thank you for the offer ... I hope that someone here will take you up on it.
As for me ... my priority (low as it is) is to find a PC-FX GA DOS/V. If you ever see one of those, then I'd love to know!
-
(http://i.imgur.com/xsfWjAV.jpg)
that actually look pretty cool, somewhat futuristic. sucks there wasnt much games for it
-
http://forum.digitpress.com/forum/showthread.php?148269-Turbo-CD-Does-it-work-with-PCE-or-Supergrafx
seems like the t16 and pc engine expansion connector is physically different, pins are the same though
-
with the supergrafx, rau30 and super cdrom, this set up will look like one awesome beast, yet it will take up more room than this ultimate pc engine set up
-
Out of curiosity, does a TG16 fit in a Super CDROM^2?
-
If I had to take a pic of the two connected you'd be looking at it and telling me that it fits.
But no. The TG16 goes in almost all the way but you can't force the pins in.
With some modification though maybe it could work.
-
A Turbografx with a Super CDrom will work with modification to the expansion port connector. I believe someone here did it years ago, but I can't remember who.
-
(http://i.imgur.com/j7YaGIl.jpg)
(http://images.clipartpanda.com/heart-clip-art-double-heart-clipart.png)
(http://i.imgur.com/xsfWjAV.jpg)
Congratulations! I bet they will make a beautiful child, please post pictures in 9 months!
-
Speaking of weird combos, :P
(http://i60.tinypic.com/2465i8h.jpg)
-
Interesting combo idea; you got me curious...
Just tried test fitting and it won't work without serious modifications. Height of the SGX expansion port is about a 1/2 inch higher than the Turbografx port making the insertion angle off. Maybe taking off the bottom of the SGX case might work.
If you somehow get the SGX to insert straight, you still would need to modify the port opening to fit.
Modding the RAU-30 to fit the Turbografx CD might be easier. That would be one funky looking system though.
(http://i.imgur.com/j7YaGIl.jpg)
(http://i.imgur.com/bopO3lj.jpg)
(http://i.imgur.com/xsfWjAV.jpg)
Not quite sure about swapping cards will be got em' together. Doesnt appear to be enough clearance to get them in and out
-
I've done the reverse before and cut down the front on a Gray Super CD-rom drive in order to fit a US Turbo Grafx. From what I remember you have to cut/file down some of the plastic on the super CD rom drive. Also file off tabs on the connector. Worked nicely.