PCEngineFans.com - The PC Engine and TurboGrafx-16 Community Forum

NEC TG-16/TE/TurboDuo => TG/PCE Repair/Mod Discussion => Topic started by: wilykat on March 29, 2015, 05:14:38 PM

Title: Recapping TurboCD dock is a pain in the butt.
Post by: wilykat on March 29, 2015, 05:14:38 PM

Taking a break from recapping job. This is my second TurboCD dock I am recapping.  The 3 boards doesn't come apart unless I desolder all the wires as none of them are socketed.  So i got one board in the bench vice (the small solder station sized one) and I still have to put up with 2 loose boards trying to cause problem.

How do you do the TurboCD dock?

Seriously I don't get paid enough to do the dock.