PCEngineFans.com - The PC Engine and TurboGrafx-16 Community Forum

NEC PC-FX => PC-FX Sales & Trades => Topic started by: retro on April 15, 2015, 06:09:39 PM

Title: looking for pcb for nec turboxpress
Post by: retro on April 15, 2015, 06:09:39 PM

hi ,i have a nec turbo xpress ,but it was sent to repair for bad caps a long time but now is dead some components are missing, and only have black screen and cant even adjust the brightness ,so i made some research but for a lack of schematics or information i joined to this community hoping to find a used pcb board ,lcd is fine

thanks in advance and best regards from mexico

Title: Re: looking for pcb for nec turboxpress
Post by: MotherGunner on April 15, 2015, 06:12:07 PM

Welcome to the forums.  Please start here (that whole section matter of fact) and go from there.

Good luck on getting your TE repaired. 

https://www.pcenginefx.com/forums/index.php?topic=5015.0

Title: Re: looking for pcb for nec turboxpress
Post by: retro on April 15, 2015, 06:26:32 PM

thanks for your advice, but  the  unsuccesfull repair was done like 3 years ago ,now i have some soldering skills ,i replace all bad caps but some components are missing like one blue with a 150k ,i think is a inductor, but i replace with 220k and still nothing ,someone have info about this will be appreaciated
 

Title: Re: looking for pcb for nec turboxpress
Post by: thesteve on April 16, 2015, 09:57:39 AM

show me what your missing and i will try to id it for you

Title: Re: looking for pcb for nec turboxpress
Post by: munchluxe63 on May 04, 2015, 07:30:54 AM

Here's a PC Engine service manual. (http://gamesx.com/wiki/lib/exe/fetch.php?media=schematics:turbografx-16_unit_service_manual_-_smtg16.pdf)


Near the end of the document are schematics and part lists. Hope this helps; this is for TG16, but it shouldn't be too different to the Turbo Express.