PCEngineFans.com - The PC Engine and TurboGrafx-16 Community Forum

NEC TG-16/TE/TurboDuo => TG/PCE Repair/Mod Discussion => Topic started by: mario_pic on June 28, 2015, 09:19:17 PM

Title: help turbo express high-res pic needed board repair
Post by: mario_pic on June 28, 2015, 09:19:17 PM

Hey guys I got a turbo express from a kid  who messed it up good I need a good high resolution pic of the turbo express board with no caps on it  there a bunch of burned traces and missing traces  I'm going to try to patch them up but I need a good photo so I got something to go by   the 2 caps near the audio jack the pads that hold the cap and the 3 small traces that go near the cap then to 3 resisters  r719 and r720 and the other one near it  thanks 

Title: Re: help turbo express high-res pic needed board repair
Post by: mario_pic on June 29, 2015, 01:09:08 PM

Here's pics of the damage please some one help need to save this unit from the trash bin lol (http://pic.photobucket.com/bwe.png) (http://s983.photobucket.com/user/mariopic/media/1435622628329.jpg.html)

Title: Re: help turbo express high-res pic needed board repair
Post by: mario_pic on June 29, 2015, 01:37:43 PM

Here is a better pic with mask removed I need to know where the broken trace goes I know where the 2 cap leads go but the tiny broken trace I got no clue can some one help thanks
(http://pic.photobucket.com/bwe.png) (http://s983.photobucket.com/user/mariopic/media/1435624540814.jpg.html)

Title: Re: help turbo express high-res pic needed board repair
Post by: thesteve on June 29, 2015, 07:20:48 PM

well arent you lucky
i have one open on bench, so i pulled the cap and checked
that trace doesnt go anywhere, its a shield between traces

Title: Re: help turbo express high-res pic needed board repair
Post by: mario_pic on July 08, 2015, 03:46:16 AM

Sweet  now I just need to lay 2 pans down for the cap and add some solder mast to the pcb and it should be good as new thanks for the help