PCEngineFans.com - The PC Engine and TurboGrafx-16 Community Forum

NEC TG-16/TE/TurboDuo => TG/PCE Repair/Mod Discussion => Topic started by: unclebugspayton on February 03, 2016, 09:10:03 AM

Title: Pc engine fuse size
Post by: unclebugspayton on February 03, 2016, 09:10:03 AM

Can someone please tell me the size of the fuse for core grafx and (http://uploads.tapatalk-cdn.com/20160203/975f833d1b68660f181a8ae0868a9f07.jpg)(http://uploads.tapatalk-cdn.com/20160203/33453d021ea4d3df7bfb7a27f726ab3a.jpg) shuttle...thank you.

Sent from my SM-N910P using Tapatalk

Title: Re: Pc engine fuse size
Post by: mickcris on February 03, 2016, 09:59:52 AM

They are both 5mm x 20mm 1A 125v axial glass fuses.

http://www.ebay.com/itm/10pcs-Glass-Tube-Fuse-Axial-Leads-5-x-20mm-1A-1Amps-F1A-Fast-Quick-Blow-250V-/290767404402

You can use a higher voltage rating but not lower.  125v ones seem hard to find whiile the 250v is more common.  Just dont get slow blow fuses.

Title: Re: Pc engine fuse size
Post by: unclebugspayton on February 03, 2016, 01:57:32 PM

Thank you!!

Sent from my SM-N910P using Tapatalk

Title: Re: Pc engine fuse size
Post by: wilykat on February 04, 2016, 11:28:47 PM

Don't order from China, they are on holiday for 2 weeks.  typical Chinese New Year holiday where even the 24-hours mart are closed.

You can get fuses from local auto shop if you can either solder on wires or replace the wire with fuse holder for easier replacing.  The metal plate over the fuse is going to be an issue when you mod the system for fuse holder.