PCEngineFans.com - The PC Engine and TurboGrafx-16 Community Forum

NEC TG-16/TE/TurboDuo => TG-16/TE/TurboDuo Discussion => Topic started by: Moosehead on February 18, 2016, 01:17:40 AM

Title: TurboPad Variations
Post by: Moosehead on February 18, 2016, 01:17:40 AM
I'm looking for some info on controller variations. Specifically, the difference between TurboPads marked NEC Technologies Inc. HES-PAD-01 and those with just the NEC Home Electronics (U.S.A.), Inc. on the back.

I had initially suspected that as a Canadian, I had a mix of hardware from two countries. Since the Canadian power supplies (molded/printed info with CSA certification) are different than the American ones (black/silver label) I thought I'd try that approach first.

Thanks!
Title: Re: TurboPad Variations
Post by: esteban on February 18, 2016, 01:29:07 AM
Yes, someone posted about this in the last year or two...but how to find it?

If only the search function was decent...

I'd try HES-PAD-01 and see what happens...

/)
Title: Re: TurboPad Variations
Post by: Moosehead on February 18, 2016, 04:58:30 AM
Thanks! I tried several searches before I posted. Fortunately your idea of using the part number yielded great results. Seems there was a discussion posted just today in fact. An undoubtedly handsome Canadian asked this very question and the part number was mentioned in the one and only reply to his thread!

Sadly it didn't help me with my question. Last night I searched through the first 30 pages of forum topics. I guess I'll take a crack at another thirty and cross my fingers.  :lol:
Title: Re: TurboPad Variations
Post by: jelloslug on February 18, 2016, 05:24:01 AM
The Turbo Pad that came with the system is different than the one that was packages separately. The differences are the info on the back is different, the "TurboPad" logo is slightly different, the circuit boards are different, the Select/Run buttons are different internally and you cannot swap the board from one to another without modifying the case.
Title: Re: TurboPad Variations
Post by: Moosehead on February 18, 2016, 05:32:29 AM
The Turbo Pad that came with the system is different than the one that was packages separately. The differences are the info on the back is different, the "TurboPad" logo is slightly different, the circuit boards are different, the Select/Run buttons are different internally and you cannot swap the board from one to another without modifying the case.

Thanks for the info. I had almost given up after searching through 60 pages of threads! I assume then that the HES-PAD-01 is the one included with the system?
Title: Re: TurboPad Variations
Post by: Phase on February 18, 2016, 07:52:40 AM
http://www.pcenginefx.com/forums/index.php?topic=19741.0
Here you go, found it.
Title: Re: TurboPad Variations
Post by: Moosehead on February 18, 2016, 10:18:23 AM
Thank you for the link. That was an interesting read. I appreciated the pictures. It saves me from cracking my controllers open for my own curiosity. These things are hard enough to find as it is.
Title: Re: TurboPad Variations
Post by: wilykat on February 18, 2016, 02:30:31 PM
Yes, someone posted about this in the last year or two...but how to find it?

If only the search function was decent...

I'd try HES-PAD-01 and see what happens...

/)

If only Google was allowed to search the forum, the answer might have been found more quickly than the built in forum search.
Title: Re: TurboPad Variations
Post by: esteban on February 19, 2016, 12:04:20 AM

Yes, someone posted about this in the last year or two...but how to find it?

If only the search function was decent...

I'd try HES-PAD-01 and see what happens...

/)

If only Google was allowed to search the forum, the answer might have been found more quickly than the built in forum search.

Yeah, at some point Aaron changed robots.txt because the forum was having lots of problems and/or eating up a lot of bandwidth.

It was the best solution given the $$$ and time/energy available.