PCEngineFans.com - The PC Engine and TurboGrafx-16 Community Forum

NEC TG-16/TE/TurboDuo => TG/PCE Repair/Mod Discussion => Topic started by: Report2Marty on April 09, 2016, 10:48:39 AM

Title: IFU-30 not getting power...
Post by: Report2Marty on April 09, 2016, 10:48:39 AM

Just received my CD-Rom2/IFU-30 in the mail today!  Hooked everything up, but no power coming through the IFU...  I ejected the CD-Rom2 from the IFU and plugged it in separately and it gets power..  Am I possibly doing something wrong!  LOL!  Thank you for all your help!

Title: Re: IFU-30 not getting power...
Post by: mickcris on April 09, 2016, 11:07:59 AM

Do you have the switch in the front pushed over?  Needs that and the console switch turned on.

Title: Re: IFU-30 not getting power...
Post by: Report2Marty on April 09, 2016, 11:26:37 AM

Lol!!!  I'm an idiot.....  Thank you so much, Mickcris!

Title: Re: IFU-30 not getting power...
Post by: mickcris on April 09, 2016, 11:36:09 AM

:)  No problem.  Glad it was an easy fix!