PCEngineFans.com - The PC Engine and TurboGrafx-16 Community Forum
NEC TG-16/TE/TurboDuo => TG/PCE Repair/Mod Discussion => Topic started by: Drummer4261900 on July 25, 2016, 09:39:32 AM
-
Got a weird Turbo Grafx controller. The back button is the run button, the left button is the 2 button, the up is the 1 button, and the right button is still the right button. The actual 1, 2, Select and run do nothing.
Is there any way to fix it?
Any help would be great.
-
Sounds like someone soldered all the wires up incorrectly.
-
Sounds like someone soldered all the wires up incorrectly.
Or replaced the cable backwards or with a different style one.
I vaguely remember there was one board connector that you had to re-arrange the connections on....
-
could be a bad trace on the controller pcb too. I had a pc engine that was doing something similar. it had a pushed in pin on the controller port of the console so it was not making contact.
-
1. Disassemble.
2. Wash rubbery nibs thoroughly with dish soap.
3. Scrub contacts on the board with isopropyl alcohol and cotton swab.
4. Exorcise demons with Bible, cross, and holy water.
5. Sacrifice a virgin pig to the Donald Trump.
6. Reassemble.
7. List on eBay as RARE and UNTESTED.
8. Hand it to unloved friends when playing Bomberman's multiplayer mode. Instant win.
-
8. Hand it to unloved friends when playing Bomberman's multiplayer mode. Instant win.
Yes.