PCEngineFans.com - The PC Engine and TurboGrafx-16 Community Forum

NEC TG-16/TE/TurboDuo => TG/PCE Repair/Mod Discussion => Topic started by: robnava on August 19, 2016, 09:45:37 PM

Title: PC Engine Super CD-ROM² RGB Mod
Post by: robnava on August 19, 2016, 09:45:37 PM

I put this video together for anyone looking to RGB Mod their Super CD-ROM². I know that all the info is out there, but didn't really seem to be in one place.

Let me know if you have any questions:
https://www.youtube.com/watch?v=-sUc5vX9OvM

-Rob

Title: Re: PC Engine Super CD-ROM² RGB Mod
Post by: Vimtoman on August 21, 2016, 12:11:02 AM

Nice video.

The 5V output on the 5pin was never connected on these drives and they are used on scart connections.
There is an empty pad called either J1 or J2 quite close to the Din connector.
Shorting this pad connects the 5V to the relevant pin on the Din socket.

Title: Re: PC Engine Super CD-ROM² RGB Mod
Post by: Fidde_se on April 12, 2018, 07:55:32 AM

(http://www.retrosampling.se/Temp/PCE_Super_CDRom2_J1_Power.html)