PCEngineFans.com - The PC Engine and TurboGrafx-16 Community Forum

NEC TG-16/TE/TurboDuo => TG/PCE Repair/Mod Discussion => Topic started by: robnava on September 22, 2016, 04:12:59 AM

Title: How-To: RGB Modding Super CD-ROM2
Post by: robnava on September 22, 2016, 04:12:59 AM

I made this a few weeks ago. I figured I should post it here in case anybody wanted to do what I did. I had some trouble finding the right information on how to RGB mod a Super CD-ROM2 specifically. Mostly with the pin-outs and just an overall explanation.

Anyway, if you have any questions, let me know. Best thing to do is contact me on Facebook or via YouTube comment since I don't frequent forums much these days.

https://www.youtube.com/watch?v=-sUc5vX9OvM

Title: Re: How-To: RGB Modding Super CD-ROM2
Post by: Krimstah on October 09, 2016, 03:27:16 PM

thank you,

will need to do this to mine some time.

Have you replaced all the capacitors in your unit? If so how hard was the fix? could a person with mediocre skills be able to do the job if they took their time?