PCEngineFans.com - The PC Engine and TurboGrafx-16 Community Forum

NEC TG-16/TE/TurboDuo => TG-16/TE/TurboDuo Discussion => Topic started by: tbone3969 on December 09, 2016, 02:17:51 PM

Title: How to run Super CD Card rom from TED 2.4
Post by: tbone3969 on December 09, 2016, 02:17:51 PM

I have a TED 2.4 and want to use it on a TurboGrafx CD system as a super system card.  I read somewhere that this can over work the TED.  Is this true?  Also where would I look to get the necessary SD files.

Thank you.

Title: Re: How to run Super CD Card rom from TED 2.4
Post by: deubeul on December 09, 2016, 07:49:07 PM

What you want is syscard3.pce .
Just launch it like a normal .pce rom.

Title: Re: How to run Super CD Card rom from TED 2.4
Post by: elmer on December 10, 2016, 03:14:28 AM

You can't just run the standard Super System Card image, that won't work on a TurboGraxf 16, and is highly discouraged on a DUO.

Here's a patch to make it work properly on all systems ...
http://www.pcenginefx.com/forums/index.php?topic=20120.0

(Take a look at the bottom of the first message in the thread.)

Title: Re: How to run Super CD Card rom from TED 2.4
Post by: tbone3969 on December 10, 2016, 04:04:01 AM

Quote from: elmer on December 10, 2016, 03:14:28 AM

You can't just run the standard Super System Card image, that won't work on a TurboGraxf 16, and is highly discouraged on a DUO.

Here's a patch to make it work properly on all systems ...
http://www.pcenginefx.com/forums/index.php?topic=20120.0

(Take a look at the bottom of the first message in the thread.)

Sweet.  This seems to be exactly what I need.  Thank you very much.

Title: Re: How to run Super CD Card rom from TED 2.4
Post by: deubeul on December 10, 2016, 04:31:46 AM

My bad, read too fast  :oops:

Title: Re: How to run Super CD Card rom from TED 2.4
Post by: tbone3969 on December 10, 2016, 05:04:41 AM

Ok so I have my Super System 3.0 rom and I have the 3.0 USA System Card patch file in xdelta format.  The instructions say to "apply the xdelta patch to the image".  How exactly do I do that?

Title: Re: How to run Super CD Card rom from TED 2.4
Post by: tbone3969 on December 10, 2016, 06:59:32 AM

Quote from: elmer on December 10, 2016, 03:14:28 AM

You can't just run the standard Super System Card image, that won't work on a TurboGraxf 16, and is highly discouraged on a DUO.

Here's a patch to make it work properly on all systems ...
http://www.pcenginefx.com/forums/index.php?topic=20120.0

(Take a look at the bottom of the first message in the thread.)

Spoke to soon

So I have my Super System 3.0 rom and I have the 3.0 USA System Card patch file in xdelta format.  The instructions say to "apply the xdelta patch to the image".  How exactly do I do that?

TIA