PCEngineFans.com - The PC Engine and TurboGrafx-16 Community Forum
NEC TG-16/TE/TurboDuo => TG/PCE Repair/Mod Discussion => Topic started by: Don0r08 on June 28, 2017, 02:18:19 AM
-
Hello! Just received my PC Engine console with a test game. Cleaned the console and started the game. The button I doesn't work on a gas in game. All other buttons work properly. The contacts on gamepad are fine. Is this a port or gamepad problem?
(https://d8v52g-dm2305.files.1drv.com/y4m79nuOMwj0b2T6dQe1syIigchT_aXFfzczM5Csd8vlW0XYlSK1V9apV0xS2GdGodyUgXo-u8NzElVKQCPuWuXls5VT9Yg_iW-Ln7fPGEeiF4Opt7xaAQ7MU0lpXVPn2Pm_FqUkAi03D89ZPVVyew0pSJDfrQ80_76TrSFfEiyHKAQ7-tWBxRyng2uTcFAgGW5UNWYpbqNmx_a1piVaZ1WuA?width=660&height=451&cropmode=none)
(https://d8v82g-dm2305.files.1drv.com/y4mFSAIx5ldiSW-Kd9sd16mvd_Q1-c_2pS5SedDkkecSq40L6Xe8nYl5Gp5tQDh8zf4w6XEqIJ0AJ-z9AFHMKfXAv_34DVyzB5ElloNP85ytZ_fWRFM1AA13aZM3AE7LOl-dbz73OubkabWyO_pjlAX7nC1d3l9Ekm0fiZd7t0SV6wLg4m5bcNpgHK-hQ515dA4C2qeUq7AnySIO8rWYz2pLg?width=660&height=481&cropmode=none)
-
Make sure the cable isn't partially unplugged inside the controller, and check the turbo and mode slider thingys to ensure the contacts are clean and not bent away from the pcb. If those check out, maybe look for board cracks or corrosion?
-
Make sure the cable isn't partially unplugged inside the controller, and check the turbo and mode slider thingys to ensure the contacts are clean and not bent away from the pcb. If those check out, maybe look for board cracks or corrosion?
Thank you! Cleaned gamepad motherboard with alcohol and the button works! :o :o :o
(https://d8v72g-dm2305.files.1drv.com/y4moScOHL36kA6PkErMLiRoVKFYznv7ZbtS0iNPseb1P7siej7v1WT7qV9p9iL3HQJo1O-gxktSh4hKEKKKxfNKVStCcSnG0eMGMOIIS_3JXCBlRJeOkaBzO2lEJ1y9e8pTCepBh5DCY2g-4ag38TiwK65MWCkmdgBjIV2ABWOYk57zI6-8fAIzhd-HrLMgETjvJVeBG48c7xPDLUY6a_PJ8Q?width=507&height=660&cropmode=none)