PCEngineFans.com - The PC Engine and TurboGrafx-16 Community Forum

NEC PC-Engine/SuperGrafx => PC Engine/SuperGrafx Discussion => Topic started by: SuperPlay on August 07, 2017, 08:47:05 PM

Title: Ootake Ver 2.87 Released.(2017.11.08)
Post by: SuperPlay on August 07, 2017, 08:47:05 PM
http://www.ouma.jp/ootake/

Chagelog (Taken from Readme.txt)

2017/11/08 2.87

  - At the top of the "Input" menu, the current pad connection status is
    displayed on one line, such as "Connect [x-Button Pad]". If you place the
    mouse cursor over it, the menu for changing the connection pad appears.

  - "3-Button Pad (I+II)" added to the pad selection of the above menu. If
    this is selected, pressing [IIIr] button will result in pressing +[II]
    button at the same time. In addition, [IIIs] button becomes [RUN] button.
    It can be used for jumping of +[II] in "Double Dragon II", and for
    simultaneous bullet shooting of +[II] in "Super Darius" and "Darius
    Plus", and so on.

  - [Alt] key can be assigned to PCE controller setting. Therefore, when you
    want to open the menu, please use [Esc] key, the button by "CPU->
    Configure Pause Button" menu, or mouse click.
    Also, when [Shift] key is pressed five times, the fixed key setting dialog
    will not be displayed. As a result, [Shift] key can be assigned to PCE
    controller setting.

  - When setting PCE controller from the [Setting] button (lower left of the
    initial green screen), PCE controllers #2-#5 are initialized (keys not
    set). If your controller setting is not stable, please set it here.

  - The number of save states can be used to a maximum of 80.
    (increased from 50 to 80)

  - In the visual scene of the end of "Tenshi no Uta II", the problem of
    stopping was solved (occurred in recent version. adjustment of CD access
    timing). I was able to check the operation without problem until ending
    with this version.

  - When entering the first tower in "Tenshi no Uta II", the problem that
    large noise exists on the head of some audio tracks (* this noises exists
    with a real PC Engine) was solved. In Ootake, this obvious unnecessary
    noise is cut and played cleanly.
    * This problem is probably caused by a CD-ROM production mistake at that
      time (the sound of the end of the previous track is mixed at the
      beginning of the track).
      In "Tenshi no Uta II", "Rayxanber II", "Eikan ha Kimini" and "Ginga
      Fukei Densetsu Sapphire", this problem happens. Ootake solves it. If you
      uncheck "Setting-> Improve-> Cut Inaccurate CD-DA Track Head Noise"
      menu, this solving will be invalid (noise appear like real PC Engine).

  - When specifying ".cue file" as an argument from the command prompt, the
    bug that could not be opened (occurred from v2.81) has been fixed.

  - Additionally, a detailed part has been improved and corrected.

  + Thank you very much for your reporting and encouragement. In this version,
    there are few changes and the source change is slight. For a while (at
    least for the Japanese autumn horse racing season), I will take a break.
    I am pleased if this v2.86 becomes a stable version. But, if urgent
    trouble or things worked on the previous version did not work, I will fix
    it soon and update it.

Title: Re: Ootake v2.81 Released (2017/08/05)
Post by: EmperorIng on August 08, 2017, 11:57:50 AM
Very nice. It's good to have a smooth-running, supported Ootake to test and enjoy games on. I'm eager to see if I notice a sound difference with Image Fight and Xevious.

As a quick question, does anyone recommend a particular program for hosting disc images on Windows 10? Ever since I moved to a new computer, Daemon Tools Lite (the old version) won't work, and the new one is malware. VCD and WinCDEmu don't seem to work, and backups that worked fine on Daemon say they are broken or corrupted on Ootake (and other emulators).
Title: Re: Ootake v2.81 Released (2017/08/05)
Post by: SuperPlay on August 09, 2017, 10:21:10 PM
I have been using Elaborate Bytes Virtual CloneDrive for a while.  It is free, works with Windows 10 and supports all common image formats such as ISO, BIN, IMG, UDF, DVD, and CCD

https://www.elby.ch/en/products/vcd.html


If you are only using ISO files Windows 10 can nativly mount these, just Right-click an ISO file in 'Windows File Explorer' and select the 'Mount' option.  This will map the ISO to a free drive letter


If you want a more complete solution, in the past I have also used Alcohol 52%.  However this comes bundled with other cr#p that you cannot uninstall,  that is why I stopped using it. The full paid version Alcohol 120% does not! http://www.alcohol-soft.com/

Title: Re: Ootake v2.81 Released (2017/08/05)
Post by: Arkhan on August 16, 2017, 08:01:59 AM
Hell yeahhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh.
Ootake is bestake.

unless you need to Debug... lol
Title: Re: Ootake v2.81 (2017/08/05) / v2.82 (2017.08.17) Released
Post by: SuperPlay on August 16, 2017, 11:06:29 PM
v2.82 (2017.08.17) released.
Title: Re: Ootake Ver2.83 released (2017.09.03)
Post by: SuperPlay on September 03, 2017, 01:11:20 AM
Ootake Ver2.83 (2017.09.03) released
Title: Re: Ootake Ver 2.83 released (2017.09.03)
Post by: SuperPlay on September 03, 2017, 09:00:46 PM
Just picked up that V2.84 is on its way soon (Maybe the last update for a while).

This should fix a few bugs introduced in 2.83, including a few with audio.

Title: Re: Ootake Ver 2.84 released (2017.09.10)
Post by: SuperPlay on September 10, 2017, 10:59:19 PM
Ootake Ver 2.84 released (2017.09.10)
Title: Re: Ootake Ver 2.84 released (2017.09.10)
Post by: NightWolve on September 12, 2017, 06:47:04 PM
Cool that he still maintains this emulator! :) I see "Ys Book I & II" got a minor needed fix.
Title: Re: Ootake Ver 2.84 released (2017.09.10)
Post by: SuperPlay on September 21, 2017, 11:08:18 PM
Cheat time!

Super Darius with Ootake.

If you press "↓ + RUN" button on the title screen, you can play 26 bodies (by Tokiwa Saburo) mode.

Although it is a complicated command if it is an actual machine, Ootake is in charge of Controller 2 and SEL button so it is possible to challenge with "↓ + RUN" because it becomes a tendon sheath if you input it every time.


Ootakeでスーパーダライアス。タイトル画面で「↓+RUN」ボタンを押すと26体戦えますか(by時任三郎)モードが遊べます。実機だと複雑なコマンドなのですが毎回入力していると腱鞘炎になってしまう為、コントローラ2とSELボタンをOotakeが担当して「↓+RUN」で挑戦可能です

Title: Re: Ootake Ver 2.85 released (2017.09.20)
Post by: SuperPlay on September 21, 2017, 11:21:14 PM
Ootake Ver 2.85 released (2017.09.20)

:-)
Title: Re: Ootake Ver 2.85 released (2017.09.20)
Post by: esteban on September 22, 2017, 02:33:36 AM
Cheat time!

Super Darius with Ootake.

If you press "↓ + RUN" button on the title screen, you can play 26 bodies (by Tokiwa Saburo) mode.

Although it is a complicated command if it is an actual machine, Ootake is in charge of Controller 2 and SEL button so it is possible to challenge with "↓ + RUN" because it becomes a tendon sheath if you input it every time.


Ootakeでスーパーダライアス。タイトル画面で「↓+RUN」ボタンを押すと26体戦えますか(by時任三郎)モードが遊べます。実機だと複雑なコマンドなのですが毎回入力していると腱鞘炎になってしまう為、コントローラ2とSELボタンをOotakeが担当して「↓+RUN」で挑戦可能です

Wait!? What is this "Tokiwa Saburo” mode?!

 
Title: Re: Ootake Ver 2.86 released (2017.10.06)
Post by: SuperPlay on October 09, 2017, 09:08:32 AM
2017/10/06 2.86 released
Title: Re: Ootake Ver 2.86 released (2017.10.06)
Post by: Arkhan on October 09, 2017, 10:04:29 AM
2017/10/06 2.86 released
I love you


Ootake For President.
Title: Re: Ootake Ver 2.86 released (2017.10.06)
Post by: SuperPlay on October 09, 2017, 09:47:58 PM
2017/10/06 2.86 released
I love you

Ootake For President.

Please don't love me, love Kitao Nakamura. I just spread the love  :wink:

Title: Re: Ootake Ver 2.86 released (2017.10.06)
Post by: Arkhan on October 10, 2017, 06:42:05 AM
You're the one spreading, so you're the one I love

huuuuuuuuuuuuuuuuuuuuuuuuu


lol.

does he post here ever?  I don't think he ever did.  Maybe he did
Title: Re: Ootake Ver 2.87 Released.(2017.11.08)
Post by: SuperPlay on November 07, 2017, 05:41:19 PM
Spreading the love!

Ootake Ver 2.87 Released.(2017.11.08)