PCEngineFans.com - The PC Engine and TurboGrafx-16 Community Forum
NEC TG-16/TE/TurboDuo => TG/PCE Repair/Mod Discussion => Topic started by: gojira1954 on August 13, 2017, 04:16:31 AM
-
A friend of mine bought one of these units recently - I've recapped the MD & PCE packs.
Initially the unit had an LD stuck inside, after power cycling the player a few times it decided to eject of it's own accord... both paks worked OK during brief testing.
After recapping the paks I again briefly tested them - both OK.
I started to play through SNATCHER and after 10 mins the standby light started rapidly blinking between orange/green and video/audio goes off :/
I tried the MD pak and same thing happened after 10mins :/ :/
Any help to try and fix appreciated...
(http://img4.imagetitan.com/img4/small/16/16_kjhgjhgjhg.jpg) (http://img4.imagetitan.com/img0e46.html?image=16_kjhgjhgjhg.jpg)
-
Does it do it with cartridges and laserdiscs as well?
Sent from my SAMSUNG-SM-N920A using Tapatalk
-
Good call ;)
Same thing happens, after ~10 mins goes into blinking death :/
The LD tray wouldn't recognise the LD a couple of times.. fault is not with the paks I guess
-
It sounds like something in the CLD-A100. I would check the belts and then voltages in the power supply
Sent from my SAMSUNG-SM-N920A using Tapatalk
-
Stand by light?
Never knew it had one
-
So it does
Never hit power on the remote before
-
Don't see anything related to fault indication, so I second check your voltages
-
How about the light of the ld/cd eject buttons? Are they off when problem happened?
-
I tried it out again tonight - played through 2 discs both sides without going into fault :s
Old CD tech is so flaky :/