PCEngineFans.com - The PC Engine and TurboGrafx-16 Community Forum
NEC TG-16/TE/TurboDuo => TG/PCE Repair/Mod Discussion => Topic started by: Slypty on December 06, 2017, 03:35:12 PM
-
Having an issue with my RX, can't get the laser to stop spinning wildly. Usually it won't read CDs, but when it does it whirs way too fast. I know about the POT to adjust and change, but that did nothing. Here's the symptoms:
- With a good laser, games will spin quickly right away.. no stopping to check the disc, just straight to whizzing too fast.
- When I use a good laser, and put it back in to my Duo (not the RX)< the laser loses its calibration and needs small adjustments.
- Tried replacing all pots, changing laser assembly, nada
- This system was previously Region modded (attempted but failed.) When I got it, I had to replace the cut Hu card, and the owner fried the 6260 when attempting the mod. I replaced the chip and fixed that, now I'm left with this weird error. Wondering what other chip errors may cause this?