PCEngineFans.com - The PC Engine and TurboGrafx-16 Community Forum

NEC TG-16/TE/TurboDuo => TG/PCE Repair/Mod Discussion => Topic started by: soop on April 10, 2018, 03:09:09 AM

Title: Someone is going to produce an IFU RGB kit
Post by: soop on April 10, 2018, 03:09:09 AM

Just stumbled across this, and I haven't seen it here yet so I figured I'd post up what I saw:

https://www.reddit.com/r/fpgagaming/comments/882nxk/pc_engine_ifurgb_kit_drives_rgb_from_the/

Title: Re: Someone is going to produce an IFU RGB kit
Post by: Cordelay on April 10, 2018, 03:33:36 AM

Not just someone, but Lord Voultar himself!  :mrgreen:
He's got a really nice youtube channel, funny and very instructive.

Title: Re: Someone is going to produce an IFU RGB kit
Post by: soop on April 10, 2018, 03:45:17 AM

Ah!  The consensus was that he's very accomplished, but I hadn't heard of him.  Hoping to get details somehow of when it's going to be available and how much.

Title: Re: Someone is going to produce an IFU RGB kit
Post by: roflmao on April 10, 2018, 03:49:23 AM

Sweet!

Title: Re: Someone is going to produce an IFU RGB kit
Post by: majors on April 10, 2018, 10:42:03 AM

With Voultars board(if it comes out), you'd still need to add some holes to the IFU? I've been holding some BNC female connectors to mount on a Tennokoe for an RGB mod, just to look industrial. I may have to work them into a briefcase...making it much more of a BEEFCASE!

Title: Re: Someone is going to produce an IFU RGB kit
Post by: soop on April 10, 2018, 11:24:20 AM

I'd just replace the existing connector tbh

Title: Re: Someone is going to produce an IFU RGB kit
Post by: majors on April 11, 2018, 12:40:24 PM

Quote from: soop on April 10, 2018, 11:24:20 AM

I'd just replace the existing connector tbh

The RCA jacks? Would you be adding more jacks for R/G/B/Sync since I assume you'll still need the audio. Or are you thinking about putting in a DIN of some sort?

Title: Re: Someone is going to produce an IFU RGB kit
Post by: soop on April 11, 2018, 07:58:57 PM

Oh yeah, forgot it was 3 RCA jacks.  Yeah I was thinking a din port.

Title: Re: Someone is going to produce an IFU RGB kit
Post by: Desh on April 12, 2018, 03:38:48 AM

I would be interested in one of these.  Voultar's channel is awesome.  There is a load of great information and tips.  Especially if you've never done any electronics repair but are considering giving it a go.  The humor is top notch as well.