PCEngineFans.com - The PC Engine and TurboGrafx-16 Community Forum

NEC TG-16/TE/TurboDuo => TG/PCE Repair/Mod Discussion => Topic started by: SamIAm on April 24, 2018, 06:58:16 PM

Title: AC Adapter plug-size/polarity list
Post by: SamIAm on April 24, 2018, 06:58:16 PM

I was researching this and thought it could use its own thread. I'll fill in the gaps later as best I can. Feel free to contribute info if you've got it!

White PC Engine, Core Grafx I & II, Shuttle
MODEL: PAD-105/PAD-106
Output voltage: 9V
Rated current：650mA
Polatrity: Center negative
Plug size：Outer radius 5.5mm, Inner radius 2.1mm
Smoothing capacitor: ??

Supergrafx
MODEL: PAD-113
Output voltage: 9V
Rated current：800mA
Polatrity: Center negative
Plug size：Outer radius 6.3mm, Inner radius 3.1mm
Smoothing capacitor: ?? (package is sealed; maybe a clamp can open it?)

Super CD-ROM2
MODEL: PAD-125
Output voltage: 12V
Rated current：1000mA
Polatrity: Center positive
Plug size：Outer radius 6.3mm, Inner radius 3.1mm
Smoothing capacitor: 16V 10000uf, 2cm diameter, 3.5cm height

Duo-R/RX
MODEL: PAD-129\PAD-130
Output voltage: 9V
Rated current：1000mA
Polatrity: Center positive
Plug size：Outer radius 5.5mm, Inner radius 2.1mm
Smoothing capacitor: 16V 4700uf, 1.5cm diameter, 3cm height

Title: Re: AC Adapter plug-size/polarity list
Post by: ClodBuster on April 24, 2018, 08:51:10 PM

Thanks for the list. You can find more information on www.gamesx.com (http://www.gamesx.com/) , either on the main site, or in the NFG/GameSX wiki.