PCEngineFans.com - The PC Engine and TurboGrafx-16 Community Forum

NEC TG-16/TE/TurboDuo => TG/PCE Repair/Mod Discussion => Topic started by: uberpunisher on May 05, 2018, 08:35:42 AM

Title: Turbo duo help
Post by: uberpunisher on May 05, 2018, 08:35:42 AM

I have a turbo duo op amp have been changed caps have been replaced. System had no sound and I cant seem to get 3.6 volts to IC503 I checked all replaced caps I thought were at fault with no luck any help anyone can provide would be greatly appreciated. 

P.S. the MOBO model is PWA-3285-A

Title: Re: Turbo duo help
Post by: Keith Courage on May 06, 2018, 02:47:08 PM

Hard to diagnose without having the board to test it but most like there there are bad traces at fault. If you are missing the 3.6V required, then  start checking traces with a multi meter till you find that ones that are bad.