PCEngineFans.com - The PC Engine and TurboGrafx-16 Community Forum

NEC TG-16/TE/TurboDuo => TG/PCE Repair/Mod Discussion => Topic started by: dragongg on September 08, 2022, 06:23:06 AM

Title: Broken traces Q901 Pc engine gt
Post by: dragongg on September 08, 2022, 06:23:06 AM
Hello everybody.
I have a problem if you with your wisdom can help me. Soldering the transistor q901 I got broken traces and I don't know where they are going to stop, could you tell me where these terminals go please, thanks for everything and I'm sorry for my bad English. ;)
Title: Re: Broken traces Q901 Pc engine gt
Post by: Keith Courage on September 08, 2022, 08:51:47 AM
You might need to scrape off some of the green coating to see where the center pole goes(green).  I think it goes somewhere else to the left but I can't see where it is with a light from behind.

(https://i.postimg.cc/C1G0rMWx/IMG-20220908-074148387-HDR.jpg)



Title: Re: Broken traces Q901 Pc engine gt
Post by: dragongg on September 08, 2022, 09:39:26 AM
Thanks for everything, you just gave me tremendous joy because I was going crazy looking at images and videos. You are the best :)