PCEngineFans.com - The PC Engine and TurboGrafx-16 Community Forum
NEC TG-16/TE/TurboDuo => TG/PCE Repair/Mod Discussion => Topic started by: Air_Zonk on June 11, 2007, 06:55:09 PM
-
I just purchased a PC Engine GT and the screen turns on but it is blank and won't play any games.
Is there a fix for this? :pray:
-
Just sounds like the contact pins either on the system/cards are dirty. You tried multiple cards as well? (And they _are_ import cards, right? :))
-
Yes, I am using PCE cards. I also tried using the TV adapter and nothing happens either. :?
-
So I take it this is not a common problem?
-
Sound issues are plentiful, but screen issues are not very common on GTs / Expresses. Have you tried fiddling with the contrast dial? If you're lucky, just the contrast control is messed up and the screen is still alive.
-
The screen issue is much less common than the audio problem, but there are capacitors in the video circuit that can dry out too.
-
Ok well I have no idea what I'm doing but I'm going in :-k I hope I can fix this thing somehow.
-
Well I opened it up very carefully and checked it out. Nothing stood out as burn or broken. Still no luck...
-
You need to check the capacitors with a multi-meter to find the messed up one, or just replace all of them and you'll be set :)
-
Hmmm looks like I have stop by my local Electronics Shop. I hope I can figure this out. I've never done anything like this before, but I'm pretty sure I can figure it out... hopefully :D Thanks!