PCEngineFans.com - The PC Engine and TurboGrafx-16 Community Forum

Non-NEC Console Related Discussion => Console Chat => Topic started by: MissaFX on January 14, 2008, 10:06:36 PM

Title: PSP - FW 3.80-4 M33 update is out
Post by: MissaFX on January 14, 2008, 10:06:36 PM

http://dark-alex.org/

Read the readme.txt file and don't mess with it if you don't understand it.  It seems to work well though and is much easier to install than previous firmwares.

Title: Re: PSP - FW 3.80-2 M33 update is out
Post by: Kitsunexus on January 15, 2008, 07:18:40 AM

I understand it alright, but question, will I have to use a Pandora before I can install it? I'm running the latest official firmware.

Title: Re: PSP - FW 3.80-2 M33 update is out
Post by: MissaFX on January 15, 2008, 09:52:49 AM

Quote from: Kitsunexus on January 15, 2008, 07:18:40 AM

I understand it alright, but question, will I have to use a Pandora before I can install it? I'm running the latest official firmware.

You would need to pandora to 3.XX if you are on a slim, then install 3.80m33, then the -2 update.  This is assuming your origional FW is version 3.72 or lower.  If it is 3.80 I think you need to wait for a new Despertar Cementerio version comes out.

  If you are on a fat you need to pandora, then install 3.52m33, then install 3.80m33, then update to -2.  If you are on a fat running a previous custom FW lower than 3.52 it is a bit trickier since you might have to clean your ID storage keys as well.

Title: Re: PSP - FW 3.80-2 M33 update is out
Post by: MissaFX on January 15, 2008, 11:47:59 AM

The 1.5 kernal for fats just came out a bit ago.  Same website.

Title: Re: PSP - FW 3.80-2 M33 update is out
Post by: Kitsunexus on January 15, 2008, 12:14:49 PM

Thanks for the info. Looks like I'll be buying a DATEL Tool Battery, as no one I know has a homebrew enabled PSP. :(