PCEngineFans.com - The PC Engine and TurboGrafx-16 Community Forum

NEC PC-Engine/SuperGrafx => PC Engine/SuperGrafx Discussion => Topic started by: Laser Burn on January 23, 2008, 04:08:47 PM

Title: Region Mod
Post by: Laser Burn on January 23, 2008, 04:08:47 PM

Just purchased a PC-Engine Duo-RX and am wondering if anyone knows a good guide so I can do a region mod to play US cards on the engine.
I looked around and the only thing I could come up with was a guide in german.

Thanks

Title: Re: Region Mod
Post by: nat on January 23, 2008, 04:28:42 PM

go to www.multimods.com (http://www.multimods.com/) and click on "PCE Region Mod" in the left margin.

Title: Re: Region Mod
Post by: Laser Burn on January 24, 2008, 02:51:19 AM

Looks like fun, are the Core Pcengines modded the same way a duorx is?  I figured they would be different due to different board revisions, also where are the region mod chips available for this?

Thanks

Title: Re: Region Mod
Post by: nat on January 24, 2008, 03:05:25 AM

Quote from: Dizzydan02 on January 24, 2008, 02:51:19 AM

Looks like fun, are the Core Pcengines modded the same way a duorx is?  I figured they would be different due to different board revisions,

They are different, but not the parts that you need to modify for the region mod. Those parts are the same across all NEC systems.

Quote

also where are the region mod chips available for this?

Dean, the guy who owns that website, also sells those. You can contact him either through that website or through this forum. His forum name here is "D-Lite". I think they run $15 or $20 but don't quote me on that.

Title: Re: Region Mod
Post by: D-Lite on January 24, 2008, 05:22:33 AM

The man is right.

PM or e-mail me (through the website).  $15+ shipping however you want it.