PCEngineFans.com - The PC Engine and TurboGrafx-16 Community Forum

NEC TG-16/TE/TurboDuo => TG/PCE Repair/Mod Discussion => Topic started by: Zeon on October 25, 2008, 09:33:20 PM

Title: Possible cantidate for a manufactured pce to tg-16 controller adapter?
Post by: Zeon on October 25, 2008, 09:33:20 PM

Anyone know the pinout on this specific cable?: http://www.recycledgoods.com/item/19995.aspx

I do realize that the mini din end is the wrong gender, though that isn't something a simple gender changer can't fix.  :wink:

Title: Re: Possible cantidate for a manufactured pce to tg-16 controller adapter?
Post by: kid_rondeau on October 26, 2008, 12:22:37 AM

Zeon,
It looks to me like the pinout on the big end is the same is it is on the small end. I don't know if that's what you were asking, but....

Title: Re: Possible cantidate for a manufactured pce to tg-16 controller adapter?
Post by: Duo_R on October 26, 2008, 04:05:31 AM

can't pull up the link Z

Title: Re: Possible cantidate for a manufactured pce to tg-16 controller adapter?
Post by: Zeon on October 26, 2008, 09:45:09 AM

Quote from: kid_rondeau on October 26, 2008, 12:22:37 AM

Zeon,
It looks to me like the pinout on the big end is the same is it is on the small end. I don't know if that's what you were asking, but....

What i mean is how are the pins mapped? What does pin 1 on the mini din end go to on the din end. I don't think every manufacturer followed a standard and the layout of pins differs from mini din to din, so there are many combinations to the wiring of the pins.