PCEngineFans.com - The PC Engine and TurboGrafx-16 Community Forum

NEC PC-Engine/SuperGrafx => PC Engine/SuperGrafx Discussion => Topic started by: ryobogard4445 on July 10, 2005, 11:30:15 AM

Title: Japanese Duo question
Post by: ryobogard4445 on July 10, 2005, 11:30:15 AM

What needs to be done in order for a Japanese Duo to be able to play U.S. HuCards?

Title: Japanese Duo question
Post by: dj898 on July 10, 2005, 11:38:11 AM

you need the mod plus swap/mod the pins of hucard slots...
best left for the expert unless you like to do that kind of stuff...

Title: Japanese Duo question
Post by: TR0N on July 10, 2005, 01:04:57 PM

Quote from: "dj898"

you need the mod plus swap/mod the pins of hucard slots...
best left for the expert unless you like to do that kind of stuff...

Agreed if you don't know electronics then send it to D-lite.

He can do it for a fee.

Title: Japanese Duo question
Post by: ryobogard4445 on July 10, 2005, 02:34:27 PM

How do I get in touch with this guy?

Title: D-Lite
Post by: msb_1971 on July 10, 2005, 03:43:37 PM

I purchased an allready modded Duo RX from em. It rocks and so does he.

I also get the ideal he's real busy right now so keep that in mind.


This is his email he's a mod at neo-geo.com

d-lite@neo-geo.com

Title: Japanese Duo question
Post by: dj898 on July 10, 2005, 03:56:33 PM

i spent little fortune to get my SGX mod'd by him.
top block!

figured since I got my SGX for free I might spent that amount for the mod but didn't realised how expensive that could be...
still I'm happy with my counrty/hucard/s-video SGX... :D
with SCD-ROM module I don't have to pull out my minty Duo-RX...