PCEngineFans.com - The PC Engine and TurboGrafx-16 Community Forum

NEC TG-16/TE/TurboDuo => TG/PCE Repair/Mod Discussion => Topic started by: Tupin on April 28, 2010, 11:16:48 AM

Title: Region modding through the expansion port?
Post by: Tupin on April 28, 2010, 11:16:48 AM
Is this possible? Taking something that plugs into the back  and modifying it with a switch mod to allow a system to play Japanese games when it is plugged into it? I heard that the expansion port has all of the connectors for the HuCards, but can it go this far?
Title: Re: Region modding through the expansion port?
Post by: SignOfZeta on April 28, 2010, 11:20:21 AM
Nope.
Title: Re: Region modding through the expansion port?
Post by: masaruh on April 28, 2010, 12:36:13 PM
Wouldn't it be possible though to create a second Hu-card reader and insert in the expansion port, and have that wired for japanese cards? Should work... No cards in the front at the same time though :-)

It would probably be beyond a pain to construct aswell, but the theory sounds good.
Title: Re: Region modding through the expansion port?
Post by: kattare on April 28, 2010, 01:25:23 PM
I think the hardest part is gonna be coming up with parts.  You'd need an expansion port plug, NEC proprietary, so you can only get it by removing it from a turbo booster or cd-rom attachment.  Then you'd need a card slot, which you could get from a dead PC Engine or TG... but by the time you've tracked all that down, why not just use a kisado or do a permanent switch mod?

I guess it'd definitely be a cool novelty.  ;-)