PCEngineFans.com - The PC Engine and TurboGrafx-16 Community Forum

NEC TG-16/TE/TurboDuo => TG/PCE Repair/Mod Discussion => Topic started by: seefuu1 on November 24, 2010, 11:16:58 AM

Title: core grafx fuse value/type ?
Post by: seefuu1 on November 24, 2010, 11:16:58 AM

I need to know what value fuse are used in the core grafx  and are they slow or fast blow ?

Title: Re: core grafx fuse value/type ?
Post by: Frank_fjs on November 24, 2010, 12:32:42 PM

Quote from: seefuu1 on November 24, 2010, 11:16:58 AM

are they slow or fast blow ?

Slow, then fast.

Title: Re: core grafx fuse value/type ?
Post by: Platinumfungi on November 28, 2010, 03:00:04 PM

1A 125V. Should be printed directly beneath the fuse on the pcb.

I'm not sure if it was fast or slow, but you can't hurt it by replacing with fast. In general for electronics you can replace a slow with a fast, but you can't replace a fast with a slow. Worst case scenario is that the fuse blows and you then know to get a slow.

Hope that helps  :D