PCEngineFans.com - The PC Engine and TurboGrafx-16 Community Forum
Non-NEC Console Related Discussion => Chit-Chat => Topic started by: ovodomina on February 23, 2022, 09:03:53 PM
-
Hello, could someone help me? :-[
I have a Daito Battle Stick 307, and I had to dismantle the stick for maintenance...but I forgot how to assemble it... Could someone who has this control help me? Some photos follow.
(Sorry for my bad english rs....)
Thanks!
-
I've never used that stick but a lot of pieces from your pick look similar to Happs and Sanwa. Maybe a diagram from Happs can help lead you in the right direction: https://cdn.shopify.com/s/files/1/0008/4262/9179/files/506084000_xv.jpg
Some parts like the e-ring/retaining clip we know will go on the base of the shaft. Hopefully the rest will fall into logical place.
Worse case, try all the combinations till it works :) Can't be that many possibilities.
-
I've never used that stick but a lot of pieces from your pick look similar to Happs and Sanwa. Maybe a diagram from Happs can help lead you in the right direction: https://cdn.shopify.com/s/files/1/0008/4262/9179/files/506084000_xv.jpg
Some parts like the e-ring/retaining clip we know will go on the base of the shaft. Hopefully the rest will fall into logical place.
Worse case, try all the combinations till it works :) Can't be that many possibilities.
Thanks for helping! I dismantled a HAAP a few years ago, as well as a Sanwa which is on the same bench now.
I reassemble everything as it appears to be, but I feel there is something strange or wrong... There is no smooth return to the central position...