PCEngineFans.com - The PC Engine and TurboGrafx-16 Community Forum

NEC TG-16/TE/TurboDuo => TG/PCE Repair/Mod Discussion => Topic started by: JMontoya9189 on July 29, 2007, 07:44:47 AM

Title: Turbo Duo Screw Help.
Post by: JMontoya9189 on July 29, 2007, 07:44:47 AM

There is one screw in my Duo that does not want to come out with the gamebit the other came out easily but this being stubborn. Is their any other way to take out the screw?

Title: Re: Turbo Duo Screw Help.
Post by: Turbo D on July 29, 2007, 12:22:25 PM

maybe some needle nose pliers, or maybe try spraying some lube like wd-40 and then using the gamebit. I tried pliers before and it didn't really work though.

Title: Re: Turbo Duo Screw Help.
Post by: SNKNostalgia on July 30, 2007, 12:09:38 PM

Best bet is to either get a better game bit that has a tighter fit. Also, are you pushing in kinda hard while turning the screw? Just try not to strip the screw or else you got problems. Those things are next to impossible to clamp onto with needle nose pliers or even the teethed doctor clamps that I have tried.