Author Topic: ADPCM Sound  (Read 317 times)

Windytune

  • Newbie
  • *
  • Posts: 5
ADPCM Sound
« on: November 12, 2007, 09:02:25 AM »
Recently purchased a PCE Duo, the system will play all CD audio, background music, but will not play the ADPCM sounds. I researched in another thread that the cause was a faulty M5205 OKI chip. I purchased one of these replacement chips. Now, the question is where does it go, and how do I go about securing it into place?

Necromancer

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 21335
Re: ADPCM Sound
« Reply #1 on: November 12, 2007, 09:12:12 AM »
It might go in the same place as the faulty chip and is likely soldered in place..... obviously.  :)

On a more serious note: try to contact fellow board member D-Lite.  He's quite knowledgeable with all things hardware and has performed this operation once or twice (if I remember correctly).  He's been pretty busy as of late and it might take him a bit to respond, so be patient.
U.S. Collection: 97% complete    155/159 titles