Author Topic: Best RGB way for ifu nowadays  (Read 345 times)


  • Newbie
  • *
  • Posts: 14
Best RGB way for ifu nowadays
« on: April 13, 2024, 03:50:58 AM »
Hi! Which kit or which way is better to have RGB in the ifu?

I've read that Ifu is not very friendly when you put RGB and there is jailbars or another interferences in the image.

This kit is the only I've found:

But I don't know is worthy. Somebody has tested it?


Keith Courage

  • Hero Member
  • *****
  • Posts: 2671
Re: Best RGB way for ifu nowadays
« Reply #1 on: April 13, 2024, 04:44:00 PM »
There are a couple ways to go about this mod.

What I like to do is avoid the docking station all together. Just install the RGB amp inside the PC engine itself and then make your scart cable with two RCA cable soldered in for the audio channels so you can plug them into the audio portion of the ifu. Meaning the main cable would plug directly into the PC engine for the video signals, no audio wired up to it, but then two RCA cables go from the end of the scart to the RCA ports on the docking station for audio.

This is a cheaper solution and avoids any possibility of video interference.

The kit that you showed the link for should be a good one though if you specifically want it installed inside the docking station itself.

« Last Edit: April 15, 2024, 01:45:34 AM by Keith Courage »