Retr0Bright a PCEngine - See the results

[ConHuevos]

Ya thats what I did, threw it on the concrete and sprayed it with the hose.

[blueraven]

My results from a few years back:

http://www.pcenginefx.com/forums/index.php?topic=7383.msg141712#msg141712

[turbokon]

The only problem I had was keeping them submerged. They keep wanting to float.

[VenomMacbeth]

Okay guys, forgive me for bringing up a non-PCE item in this thread, but I didn't want to make a whole separate topic just for this one thing...

So I have this Recca pirate famicom cart.  This is what color it's supposed to be:



That's the back of the cartridge.  Other than a few smudges here and there, it's in fair shape.  Now, here's the front:



Ugly, huh?  I haven't the slightest idea how to disassemble this cartridge (no screws :/ ) and if I did, I wouldn't know how to do the whole "retrobrite" thing without harming the labels.  Any suggestions?

[Arkhan]

The screws are under the label, duder. 

Get the cream kind of developer, rather than the liquid.

smear it on the yellowy parts, lay it in the driveway. 

[VenomMacbeth]

The screws are under the label, duder. 

Get the cream kind of developer, rather than the liquid.

smear it on the yellowy parts, lay it in the driveway. 

Cool, thanks! I have a few yellowed Sunsoft fami carts I'll probably try that, on, too...and my famicom...

Come to think of it, I think I'm gonna do it with my PCE, too.  It's not horrible...but it could be better.

[ConHuevos]

The screws are under the label, duder. 

Get the cream kind of developer, rather than the liquid.

smear it on the yellowy parts, lay it in the driveway. 

Whoah seriously?  The cream you can use as-is?  I just checked and I could buy the volume 50 without a license, but they only had it in cream.

[blueraven]

Make it with glycerine, peroxide, and xanthan gum. It will be thick as strawberry jam.

The screws are under the label, duder.  

Get the cream kind of developer, rather than the liquid.

smear it on the yellowy parts, lay it in the driveway.  

YES. please click my previous link for the instructions on how to make it ConHuevos. I think there is also like a page and a half of follow-up on being a bathroom chemist.

[Frank_fjs]

The screws aren't under the label, Famicom carts don't have any screws. They are sealed shut via clips inside the cart and are a pain in the arse to open.

[Arkhan]

The screws aren't under the label, Famicom carts don't have any screws. They are sealed shut via clips inside the cart and are a pain in the arse to open.

I've had screws under 1 or 2 pir8 famicom carts.

you can poke around the label and feel for the soft spot and poke a screwdriver through it and get it open.

If there's no screw, you can usually just cram a butter knife up in there and pop it open.  Like my MSX carts I pry open. (but those have screws also)

[ConHuevos]

Just did one of my SNES's...but I forgot the little flap where the carts get inserted...but it makes for a great comparison of what it used to look like!  I never even noticed it was that bad until the other areas were clean and I could see what it looked like before I cleaned it.

I used oxy clean, xanthum gum and developer volume 40.





I just busted this out of my closet after being in there for about 8 years...ya...it's going to get retr0brighted next: