« previous next »
Pages: 1 [2]

Author Topic: picked up some Arcade PCBs  (Read 1032 times)

Duo_R

  • Hero Member
  • *****
  • Posts: 3302
Re: picked up some Arcade PCBs
« Reply #15 on: May 03, 2015, 06:40:10 AM »
I'm redoing the wiring, I just noticed that the cab wasn't grounded at the wall plug. They just removed the ground wire. I can't understand why they would do that!!!

I got a wiring dig ram and trying to clean this up. Anyone have experience wiring cabs in case I got questions? It was working but just want this wired up correctly.


Part of the issue is it was centipede cab converted to twin cobra. They did a horrible job with lots of cut wires and twist ties when it should be directly connected. Lol
Logged
Add my YouTube channel:


For sale trade list: http://tinyurl.com/2csm7kq

pulstar

  • Sr. Member
  • ****
  • Posts: 276
Re: picked up some Arcade PCBs
« Reply #16 on: May 03, 2015, 06:47:22 AM »
Most cabs in the UK (Woodies at least) have long runs of cables generally connected by molex plugs/connectors, so it's not unusual to have sections not connected directly...however, it sounds like a dodgy way to do it by simply twisting the wires together. Best to get that sorted as soon as possible.
Logged
My favourite pigeon had a fatal run-in with a cloud...

PunkicCyborg

  • Hero Member
  • *****
  • Posts: 3714
Re: picked up some Arcade PCBs
« Reply #17 on: May 03, 2015, 09:37:24 AM »
If it's all working I wouldn't mess with it too much. Just clean up all the dodgy splices with proper solder joints and shrink tube over them. The power cord can be easily replaced if the ground prong is just broken off.
Logged
(19:28:25) GE0: superdead told me in whisper that his favorite game is mario paint

majors

  • Hero Member
  • *****
  • Posts: 1347
  • Have cabs, will travel
Re: picked up some Arcade PCBs
« Reply #18 on: May 04, 2015, 01:28:42 AM »
Quote from: Duo_R on May 03, 2015, 06:40:10 AM
Part of the issue is it was centipede cab converted to twin cobra. They did a horrible job with lots of cut wires and twist ties when it should be directly connected. Lol

Ops would do the least amount of work to get a cab running in an arcade. Centipede non-JAMMA trackball game conversion to JAMMA with joysticks? Oh yeah, prolly a rats nest in there. I've come across cabs that were so bad, I just 100% gutted the wires and replaced with a new JAMMA harness, and re run all the power. It is a good way to learn plus you know it's no longer a fire hazard.
Logged
PCE Daisakusen RIP - "Booze should be a choice, not a privilege" -KCDC (The FP)
"The dumb are mostly intrigued by the drum"

Duo_R

  • Hero Member
  • *****
  • Posts: 3302
Re: picked up some Arcade PCBs
« Reply #19 on: May 07, 2015, 06:42:48 AM »
OK my cabinet is almost ready to swap in some shooters to test out.

Hopefully I can test them out this week.

https://www.pcenginefx.com/forums/index.php?topic=12484.msg405781#msg405781
« Last Edit: May 07, 2015, 06:57:21 AM by Duo_R »
Logged
Add my YouTube channel:


For sale trade list: http://tinyurl.com/2csm7kq

Duo_R

  • Hero Member
  • *****
  • Posts: 3302
Re: picked up some Arcade PCBs
« Reply #20 on: May 16, 2015, 08:21:23 PM »
Ok all boards working except Sky Shark and Image Fight.

Buster Bros turned out to be Crime City, but the game is pretty fun. Bad Dudes with guns!

I'm now trouble shooting the boards that aren't working. I'm also ready to build a supergun now that I know how all this stuff works. ;-)
Logged
Add my YouTube channel:


For sale trade list: http://tinyurl.com/2csm7kq

Duo_R

  • Hero Member
  • *****
  • Posts: 3302
Re: picked up some Arcade PCBs
« Reply #21 on: May 16, 2015, 11:41:17 PM »
Image fight is fixed, but the game is actually Dragon Breed even tho the sticker says Image Fight. No complaints since this game looks amazingly epic! Huge sprites, dragons,
Fantasy theme by Irem, what's not to like?
Logged
Add my YouTube channel:


For sale trade list: http://tinyurl.com/2csm7kq
Pages: 1 [2]
« previous next »