Gents,
I picked up a broken Super CDROM with absolutely no sound.  Everything else, including the CD player itself worked fine, just no sound.  I ran it through the dishwasher and did a full recap.  Now I have sound.  Yay!  But now the CD player won't play discs.  Here's what is happening:
It will spin, the laser will start to read the disc, then after maybe 2 secs the screen will dim slightly and it will start all over again.  It will keep doing this until I turn the power off.  It never gets to the "please set disc screen".  I have messed around with the pots a bit, but there is minimal change.  There also isnt a guide for tweaking the pots on a Super CDROM, so I have been going off the Duo guide for now.
It seems like it is getting to a point in the early sequence (logic sequence?) and then failing a test and starting all over or something.  I don't have an oscilloscope or even know how to use one so that is probably out.  
Any help is appreciated.  This is really frustrating because the damn thing was working before I "fixed" it.
-dan