Author Topic: Wireless TurboPads: Feasible?  (Read 531 times)

2X4

  • Full Member
  • ***
  • Posts: 223
Wireless TurboPads: Feasible?
« on: June 04, 2008, 04:45:14 AM »
I have a set of the infrared pc engine controllers, which are ok, as long as you don't turn more than 5 degrees from the receiver, and someone started a petition to get some throwback company to make new wireless controllers (not showing signs of fruition), so I'm reading an article today about some dude who has hacked nes, snes and genesis controllers into wireless VC controllers for the Wii, and I'm thinking "how hard would it be to hack a turbopad into a wireless turbopad?"

Anyone with the skillz, please tell me, what would it basically take to do this?  Give me a basic idea of what materials would be needed and how it would work. 
The Turbo was Dual Core when Dual Core wasn't cool . . .

guyjin

  • Hero Member
  • *****
  • Posts: 3896
Re: Wireless TurboPads: Feasible?
« Reply #1 on: June 04, 2008, 05:26:44 AM »
Well, there are psx>pce controller adaptors, and there are wireless psx controllers, so you could do it that way.
"Fun is a strong word." - SNK
"Today, people do all kind of shit." - Tatsujin

Turbo D

  • Hero Member
  • *****
  • Posts: 3989
Re: Wireless TurboPads: Feasible?
« Reply #2 on: June 04, 2008, 09:10:10 AM »
what we really need is a blue tooth avenue 6! With one of those, you could play streetfighter2' on your pcengine from the other room, lol.

Platinumfungi

  • Sr. Member
  • ****
  • Posts: 260
Re: Wireless TurboPads: Feasible?
« Reply #3 on: June 04, 2008, 12:27:27 PM »
Well, there are psx>pce controller adaptors, and there are wireless psx controllers, so you could do it that way.

If that would work, could you then take the PSX controller's guts, chop them up (and rewire them if need be) to fit/be inside a NEC controller...?

2X4

  • Full Member
  • ***
  • Posts: 223
Re: Wireless TurboPads: Feasible?
« Reply #4 on: June 05, 2008, 08:15:23 AM »
I was thinking more along the lines of possibly converting the infrared pc engine controllers to RF.  Or straight up building an rf transmitter and receiver and hacking them into a turbo pad/turbo tap kind of thing.  Would this be possible, and if so how would I do it?  Here's the article that spawned this thread
« Last Edit: June 05, 2008, 10:22:53 AM by nat »
The Turbo was Dual Core when Dual Core wasn't cool . . .

Platinumfungi

  • Sr. Member
  • ****
  • Posts: 260
Re: Wireless TurboPads: Feasible?
« Reply #5 on: June 05, 2008, 09:35:51 AM »
Hmm...I can't seem to get your link to work 2x4...

nat

  • Hero Member
  • *****
  • Posts: 7085
Re: Wireless TurboPads: Feasible?
« Reply #6 on: June 05, 2008, 10:23:03 AM »
I fixed the link in his message.

CkRtech

  • Newbie
  • *
  • Posts: 34
Re: Wireless TurboPads: Feasible?
« Reply #7 on: June 11, 2008, 03:42:38 PM »
Hey 2X4.

That would really be a useful controller hack to have - wireless PCE. The problem is that the wireless part has to be designed for the console rather than the controller. If you hacked a PSX controller into bits and put them inside a PCE controller case, you would still essentially have a playstation controller in a new shell. Unless you have that converter that guyjin mentioned, you'll be in trouble when you attempt to hook it up to your PCE.

 :-k

In theory, I don't see you having too much trouble getting the d-pad, select, start, X and O buttons of the PSX controller to line up with the appropriate PCE buttons. The question would be how do you hook up your switches for "turbo." It could be that the PSX-> PCE converter is designed so the L and R buttons cycle the turbo settings for PCE buttons II and I. That being the case, you may have to get creative when it comes to converting the turbo switches to work like you're hitting the L and R buttons on the PSX controller.

OR.....you could just not care about the turbo buttons.

GUTS

  • Guest
Re: Wireless TurboPads: Feasible?
« Reply #8 on: June 12, 2008, 08:34:45 AM »
I've heard that people make wireless SNES controllers with Wavebirds, so maybe that would work.  A SNES and TG controller are roughly the same size, maybe you could cram all the wavebird stuff inside one of those awesome RX 6 button pads.