Author Topic: Turbografx-16 & PC-Engine Reproduction Hucards & Cases Now for Sale!!!!  (Read 22169 times)

esteban

  • Hero Member
  • *****
  • Posts: 24063
Re: Turbografx-16 & PC-Engine Reproduction Hucards Now for Sale!!!!
« Reply #90 on: April 29, 2016, 02:55:12 AM »
Did somebody asked for terra cresta ii?






Using the last bit of strength I can muster....

...before my broken body shuts down completely...

Every single HuCARD + packaging = Phenomenal!

...arrghhh...


Terra Cresta II, pictured above = Godhead


.....pfshhhhh.....
  |    | 

wilykat

  • Hero Member
  • *****
  • Posts: 908
Re: Turbografx-16 & PC-Engine Reproduction Hucards Now for Sale!!!!
« Reply #91 on: April 30, 2016, 10:54:20 AM »
Suggestion: put that grey dot somewhere else, it looks a bit nasty covering part of PC Engine logo.  A little up should work and still be useful enough to keep the card from bouncing around.

HailingTheThings

  • Hero Member
  • *****
  • Posts: 3229
Re: Turbografx-16 & PC-Engine Reproduction Hucards Now for Sale!!!!
« Reply #92 on: April 30, 2016, 12:31:46 PM »
Do these HuCARDs fit in those cases if they have a sleeve on? Maybe my eyes are going bad, but it looks like they be nakey in the pics?

turbokon

  • Hero Member
  • *****
  • Posts: 2181
Re: Turbografx-16 & PC-Engine Reproduction Hucards Now for Sale!!!!
« Reply #93 on: April 30, 2016, 12:46:45 PM »
Suggestion: put that grey dot somewhere else, it looks a bit nasty covering part of PC Engine logo.  A little up should work and still be useful enough to keep the card from bouncing around.

Good point, that's easy to remedy. 
Turbo fan since 1991 after owning my first system.

Check out my website:)
www.tg16pcemods.com

turbokon

  • Hero Member
  • *****
  • Posts: 2181
Re: Turbografx-16 & PC-Engine Reproduction Hucards Now for Sale!!!!
« Reply #94 on: April 30, 2016, 12:47:29 PM »
Do these HuCARDs fit in those cases if they have a sleeve on? Maybe my eyes are going bad, but it looks like they be nakey in the pics?


Yeah its nakey.  It won't fit the case with the sleeve. 
Turbo fan since 1991 after owning my first system.

Check out my website:)
www.tg16pcemods.com

mickcris

  • Hero Member
  • *****
  • Posts: 754
Re: Turbografx-16 & PC-Engine Reproduction Hucards Now for Sale!!!!
« Reply #95 on: April 30, 2016, 12:58:29 PM »
Suggestion: put that grey dot somewhere else, it looks a bit nasty covering part of PC Engine logo.  A little up should work and still be useful enough to keep the card from bouncing around.

Good point, that's easy to remedy.
If you can find black ones, you could put 1 above and 1 below in the black area to camouflage them a bit.

Or 2 white ones in the white areas 

HailingTheThings

  • Hero Member
  • *****
  • Posts: 3229
Re: Turbografx-16 & PC-Engine Reproduction Hucards Now for Sale!!!!
« Reply #96 on: April 30, 2016, 03:33:57 PM »
Do these HuCARDs fit in those cases if they have a sleeve on? Maybe my eyes are going bad, but it looks like they be nakey in the pics?


Yeah its nakey.  It won't fit the case with the sleeve.

Thanks.

Skins4thewin

  • Newbie
  • *
  • Posts: 27
Re: Turbografx-16 & PC-Engine Reproduction Hucards Now for Sale!!!!
« Reply #97 on: May 02, 2016, 09:59:35 PM »
I am also very excited for the possibility of Translated versions of games for these.

turbokon

  • Hero Member
  • *****
  • Posts: 2181
Re: Turbografx-16 & PC-Engine Reproduction Hucards Now for Sale!!!!
« Reply #98 on: May 03, 2016, 03:43:46 PM »
Couple of more games I just made.

Turbo fan since 1991 after owning my first system.

Check out my website:)
www.tg16pcemods.com

NightWolve

  • Hero Member
  • *****
  • Posts: 5277
Re: Turbografx-16 & PC-Engine Reproduction Hucards Now for Sale!!!!
« Reply #99 on: May 03, 2016, 03:58:23 PM »
It's hard to believe working HuCards are in production again like this... Wonder about the factory they found to get these made, what it took behind the scenes, impressive all the way!

mickcris

  • Hero Member
  • *****
  • Posts: 754
Re: Turbografx-16 & PC-Engine Reproduction Hucards Now for Sale!!!!
« Reply #100 on: May 03, 2016, 05:57:43 PM »
It's hard to believe working HuCards are in production again like this... Wonder about the factory they found to get these made, what it took behind the scenes, impressive all the way!

Pretty sure they are from here
https://www.pcenginefx.com/forums/index.php?topic=19848.0

Not sure how is making them though 
« Last Edit: May 03, 2016, 05:59:53 PM by mickcris »

thesteve

  • Hero Member
  • *****
  • Posts: 2952
Re: Turbografx-16 & PC-Engine Reproduction Hucards Now for Sale!!!!
« Reply #101 on: May 03, 2016, 07:03:19 PM »
It's hard to believe working HuCards are in production again like this... Wonder about the factory they found to get these made, what it took behind the scenes, impressive all the way!

Pretty sure they are from here
https://www.pcenginefx.com/forums/index.php?topic=19848.0

Not sure how is making them though 
i assure you they are not..............
i did the layout on them

mickcris

  • Hero Member
  • *****
  • Posts: 754
Re: Turbografx-16 & PC-Engine Reproduction Hucards Now for Sale!!!!
« Reply #102 on: May 03, 2016, 07:04:57 PM »
Cool.  They just look very similar.  In that thread turbokon had shown where he had some and was programming them.

thesteve

  • Hero Member
  • *****
  • Posts: 2952
Re: Turbografx-16 & PC-Engine Reproduction Hucards Now for Sale!!!!
« Reply #103 on: May 03, 2016, 07:10:14 PM »
they may look similure, but they dont feel it
these dont use a plastic backing, and instead both sides are FR4 fiberglass material, making them extremely sturdy and cold to the touch

NightWolve

  • Hero Member
  • *****
  • Posts: 5277
Re: Turbografx-16 & PC-Engine Reproduction Hucards Now for Sale!!!!
« Reply #104 on: May 04, 2016, 02:09:55 AM »
https://www.pcenginefx.com/forums/index.php?topic=19848.0

Ah right, turbokon started there, ordered some from that French guy, learned how to program them, and later teamed up with Jodi and Steve to do their own with full cases/manuals also.

So Steve, what factory did you find to produce the cards, like what ichigobankai found, this http://www.ponoko.com/ ?